Lspci

osgiliath:~# date
Tue Dec  5 21:35:50 CET 2006

osgiliath:~# lspci -vv

00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
       Subsystem: ASUSTeK Computer Inc. Unknown device 80ac
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
       Capabilities: [40] AGP version 2.0
               Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
               Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
       Capabilities: [60] HyperTransport: Host or Secondary Interface
               Command: WarmRst+ DblEnd-
               Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
               Link Config: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
               Revision ID: 0.16

00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
       Subsystem: ASUSTeK Computer Inc. Unknown device 80ac
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
       Subsystem: ASUSTeK Computer Inc. Unknown device 80ac
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
       Subsystem: ASUSTeK Computer Inc. Unknown device 80ac
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
       Subsystem: ASUSTeK Computer Inc. Unknown device 80ac
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
       Subsystem: ASUSTeK Computer Inc. Unknown device 80ac
       Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
       Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
       Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Capabilities: [48] HyperTransport: Slave or Primary Interface
               Command: BaseUnitID=1 UnitCnt=15 MastHost- DefDir-
               Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC+ TXO- <CRCErr=0
               Link Config 0: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
               Link Control 1: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO+ <CRCErr=0
               Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
               Revision ID: 0.00

00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
       Subsystem: ASUSTeK Computer Inc. Unknown device 0c11
       Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Interrupt: pin A routed to IRQ 12
       Region 0: I/O ports at dc00 [size=32]
       Capabilities: [44] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
       Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0 (750ns min, 250ns max)
       Interrupt: pin A routed to IRQ 11
       Region 0: Memory at ee087000 (32-bit, non-prefetchable) [size=4K]
       Capabilities: [44] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
       Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0 (750ns min, 250ns max)
       Interrupt: pin B routed to IRQ 11
       Region 0: Memory at ee082000 (32-bit, non-prefetchable) [size=4K]
       Capabilities: [44] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
       Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0 (750ns min, 250ns max)
       Interrupt: pin C routed to IRQ 5
       Region 0: Memory at ee083000 (32-bit, non-prefetchable) [size=256]
       Capabilities: [44] Debug port
       Capabilities: [80] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
       Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard onboard nForce2 Ethernet
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0 (250ns min, 5000ns max)
       Interrupt: pin A routed to IRQ 5
       Region 0: Memory at ee086000 (32-bit, non-prefetchable) [size=4K]
       Region 1: I/O ports at e000 [size=8]
       Capabilities: [44] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
               Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio Processing Unit (rev a2)
       Subsystem: ASUSTeK Computer Inc. Unknown device 0c11
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0 (250ns min, 3000ns max)
       Interrupt: pin A routed to IRQ 11
       Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=512K]
       Capabilities: [44] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
       Subsystem: ASUSTeK Computer Inc. nForce2 AC97 Audio Controler (MCP)
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0 (500ns min, 1250ns max)
       Interrupt: pin A routed to IRQ 5
       Region 0: I/O ports at e400 [size=256]
       Region 1: I/O ports at d000 [size=128]
       Region 2: Memory at ee080000 (32-bit, non-prefetchable) [size=4K]
       Capabilities: [44] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
       I/O behind bridge: 00009000-0000afff
       Memory behind bridge: ec000000-edffffff
       Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
       BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
       Subsystem: ASUSTeK Computer Inc. Unknown device 0c11
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0 (750ns min, 250ns max)
       Region 4: I/O ports at f000 [size=16]
       Capabilities: [44] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 PCI bridge: nVidia Corporation nForce2 PCI Bridge (rev a3) (prog-if 00 [Normal decode])
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0
       Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
       I/O behind bridge: 0000b000-0000bfff
       Memory behind bridge: e8000000-e9ffffff
       Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
       BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3) (prog-if 10 [OHCI])
       Subsystem: ASUSTeK Computer Inc. Unknown device 809a
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 0 (750ns min, 250ns max)
       Interrupt: pin A routed to IRQ 12
       Region 0: Memory at ee084000 (32-bit, non-prefetchable) [size=2K]
       Region 1: Memory at ee085000 (32-bit, non-prefetchable) [size=64]
       Capabilities: [44] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
       Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 158
       Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
       I/O behind bridge: 0000c000-0000cfff
       Memory behind bridge: ea000000-ebffffff
       Prefetchable memory behind bridge: e4000000-e7ffffff
       Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
       BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

01:09.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
       Subsystem: Netgear Unknown device f312
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 158 (2750ns min, 13000ns max)
       Interrupt: pin A routed to IRQ 12
       Region 0: I/O ports at 9000 [size=256]
       Region 1: Memory at ed000000 (32-bit, non-prefetchable) [size=4K]
       Capabilities: [40] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=320mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME+

01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)
       Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 144, Cache Line Size: 32 bytes
       Interrupt: pin A routed to IRQ 11
       Region 0: I/O ports at 9400 [size=8]
       Region 1: I/O ports at 9800 [size=4]
       Region 2: I/O ports at 9c00 [size=8]
       Region 3: I/O ports at a000 [size=4]
       Region 4: I/O ports at a400 [size=16]
       Region 5: Memory at ed001000 (32-bit, non-prefetchable) [size=512]
       Capabilities: [60] Power Management version 2
               Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=2 PME-

02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller [Tornado] (rev 40)
       Subsystem: ASUSTeK Computer Inc. A7N8X Deluxe onboard 3C920B-EMB Integrated Fast Ethernet Controller
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 152 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
       Interrupt: pin A routed to IRQ 11
       Region 0: I/O ports at b000 [size=128]
       Region 1: Memory at e9000000 (32-bit, non-prefetchable) [size=128]
       Capabilities: [dc] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
               Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro Ultra TF (prog-if 00 [VGA])
       Subsystem: Hightech Information System Ltd. Unknown device 0100
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 158 (2000ns min), Cache Line Size: 32 bytes
       Interrupt: pin A routed to IRQ 12
       Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
       Region 1: I/O ports at c000 [size=256]
       Region 2: Memory at eb000000 (32-bit, non-prefetchable) [size=16K]
       Capabilities: [50] AGP version 2.0
               Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
               Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
       Capabilities: [5c] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 PME-Enable- DSel=0 DScale=0 PME-